Polymaker PolySupport Breakaway Support Material

Polymaker PolySupport Breakaway Support Material

PolySupport is a breakaway support for Polymaker PLA based filaments. It has a perfect interface with PLA, strong enough to support it and easily removable by hand. It does not dissolve, but easily pulls off by hand.

PolySupport™ was designed specifically for PLA. However we had positive customer feedback on using PolySupport with PolySmooth, PolyCast and small PolyMax PC parts.

Printer Settings

Printing Temperature: 220˚C - 230˚C
Bed Temperature: 25˚C - 60˚C
Printing Speed: 20mm/s - 40mm/s
Fan: ON

Direct Drive:

• Retraction Distance: 1mm
• Retraction Speed: 20mm/s

Indirect Drive:

• Retraction Distance: 3mm
• Retraction Speed: 40mm/s

Drying Settings: 55˚C for 6h (Only if the material has absorbed moisture)