FormFutura  |  SKU: EZCLEAN1000

EasyClean Resin Cleaner

$26.99


Description

FormFutura EasyClean Resin Cleaner

EasyClean resin cleaner is chemically engineered to safely and effectively remove any uncured photopolymer 3D printing resin in the range of 385 – 420nm from SLA, DLP, or LCD 3D printed objects. EasyClean is made from organic solvents and is safer and more effective than Isopropyl Alcohol (IPA) and can be used roughly 3 times longer than IPA.

Key features

  • Superb cleaning properties

    • Breaks down resin better than IPA and other solutions

    • Doesn't leave any residue, cloudiness, or white haze

    • No sticky prints

  • Compatible with all UV curable resins for SLA, DLP, and LCD 3D printing technologies

  • Compatible for cleaning with magnetic stirrers, ultrasonic cleaners, and washing/curing stations

  • No transport restrictions

    • Not classified as a dangerous good by ADR and IATA

  • Non-flammable

  • Limited odor

  • Can also be used for cleaning build plates, vats, and other surfaces that come in contact with resins

  • Long shelflife up to 24 months

How to use

  1. Put the resin print in a tub filled with EasyClean resin cleaner

  2. Clean for 10-15 minutes when cleaning by hand, or 5 minutes when using an ultrasonic cleaner

  3. After cleaning let the printed object dry or rinse with tap water

Storage

Store EasyClean in a well-ventilated area in its original HDPE bottle, or jerrycan. Make sure the bottle or jerrycan is tightly closed and stored at a temperature below 25°C. When stored properly EasyClean Resin Cleaner has a shelflife up to 24 months.

FormFutura Resin EasyClean Resin Cleaner
FormFutura

EasyClean Resin Cleaner

$26.99

FormFutura EasyClean Resin Cleaner

EasyClean resin cleaner is chemically engineered to safely and effectively remove any uncured photopolymer 3D printing resin in the range of 385 – 420nm from SLA, DLP, or LCD 3D printed objects. EasyClean is made from organic solvents and is safer and more effective than Isopropyl Alcohol (IPA) and can be used roughly 3 times longer than IPA.

Key features

How to use

  1. Put the resin print in a tub filled with EasyClean resin cleaner

  2. Clean for 10-15 minutes when cleaning by hand, or 5 minutes when using an ultrasonic cleaner

  3. After cleaning let the printed object dry or rinse with tap water

Storage

Store EasyClean in a well-ventilated area in its original HDPE bottle, or jerrycan. Make sure the bottle or jerrycan is tightly closed and stored at a temperature below 25°C. When stored properly EasyClean Resin Cleaner has a shelflife up to 24 months.

View product