Pre-Order: Raise3D T700 Large Build Volume 3D Printer with 1-Meter Build Height
Pre-Order: Raise3D T700 Large Build Volume 3D Printer with 1-Meter ...
Description
Description
Pre-Order: Raise3D T700 Large Build Volume 3D Printer
NOTE: T700 Pre-orders are currently expected to ship in January 2027
The Raise3D T700 is a large-format FFF 3D printer with a 700 × 500 × 1,000 mm build volume and a full meter of build height, giving you room for larger prototypes, jigs, fixtures and tooling. Its TwinFlow™ system combines two filament paths with a single nozzle, supporting single extrusion, dual extrusion and dual-extrusion high-flow modes.
A 0.6 mm nozzle is supplied as standard, with a 0.4 mm option available. With a maximum nozzle temperature of 420°C, an actively heated chamber up to 60°C and a heated build plate up to 120°C, the T700 supports a range of material workflows. Camera monitoring and print detection functions help you follow the job from the printer interface.
Meet the Raise3D T700
The Raise3D T700 provides a 700 × 500 × 1,000 mm build volume for large or tall prototypes, jigs, fixtures and tooling. TwinFlow combines two filament paths with a single nozzle, supporting single extrusion, dual extrusion and dual-extrusion high-flow modes.
A nozzle temperature up to 420°C, actively heated chamber up to 60°C and heated build plate up to 120°C support material-specific printing workflows. Camera monitoring, print detection functions and a flexible double-sided PEI plate complete the workflow from preparation to part retrieval.
● 700 × 500 × 1,000 Build volume · mm ● 420°C Maximum nozzle temperature ● 60°C Maximum heated chamber temperature ● TwinFlow™ Two feed paths · one nozzle
Why Choose the T700?
Built for large-part printing, the T700 combines TwinFlow extrusion, controlled motion and active chamber heating with print monitoring and a flexible PEI build surface.
TwinFlow Single-Nozzle Extrusion — Two filament paths converge at a single nozzle, supporting single extrusion, dual extrusion and dual-extrusion high-flow modes.
High-Speed Motion System — Maximum printing speed 600 mm/s, maximum toolhead speed 1,500 mm/s and maximum toolhead acceleration 30,000 mm/s² for controlled movement during large prints.
High-Temperature Printing — Maximum nozzle temperature 420°C with a CuCrZr base nozzle and wear-resistant SiC tip; actively heated chamber up to 60°C and heated build plate up to 120°C.
Dual-Spool Filament Feeding — TwinFlow™ combines two filament paths with a single nozzle. The T700 also supports the Raise3D Filament Station (RFS) for uninterrupted printing.
What Can You Make with the T700?
Use a 700 × 500 × 1,000 mm build volume for larger prototypes, manufacturing aids and form models. Plan the print orientation and support structures around the part’s geometry, material and intended use.
Large Housing Prototypes — Produce large housings in one piece to review overall form, fit and assembly before committing to production tooling.
Full-Scale Design Models — Explore full-scale wheel and other complex design models, including geometry and support strategies, within the T700 build volume.
Functional Mechanism Prototypes — Develop grippers and articulated mechanisms to evaluate movement, component fit and assembly through physical prototypes.
Software & Connectivity
A clear workflow from preparing your model to starting and monitoring your print.
01. Prepare & Slice — Prepare your model and select suitable print settings in ideaMaker.
02. Transfer Your File — Choose a file-transfer method supported by your software and printer configuration.
03. Print & Monitor — Start the prepared file on the T700 and follow the print’s progress.
See the T700 in Action
From the first layers to the finished part, plan the T700 workflow around the material, support strategy and workspace. Keep time for cooling, inspection and safe part retrieval as well as printing.
Printing in Progress — Prepare the part orientation, supports and material profile in ideaMaker before starting the job. During printing, follow the part’s progress and check the build area through the available camera and printer interface.
Printhead in Motion — See the printhead lay down material across the build plate in a close-up view of the printing process.
From Large-Format Print to Part Removal — See the scale of the completed one-piece sample, then watch it being lifted out of the T700 build chamber.
7-Inch Touchscreen Control — View the T700’s 7-inch touchscreen and on-printer interface for checking print progress and accessing machine controls.
Materials & Compatibility
Choose among Hyper Speed, Industrial and Premium filaments, from everyday prototyping materials to reinforced grades and support materials. The lists below separate available materials from coming-soon releases; match the nozzle, preparation and ideaMaker profile to the specific grade.
Hyper Speed — PLA, PLA Pro, ABS, PETG CF and PET CF.
Industrial — Available: PPA CF, PET Support and PPS CF. Coming soon: PPA GF, PET CF, PET GF, PETG ESD and PPA Support.
Premium — Available: PLA, ABS, ASA, PETG and TPU-95A. Coming soon: PVA+.
Download the Technical Specifications for T-Series 3D printers
Product Specifications
| Print technology | Fused Filament Fabrication (FFF) |
| Build volume (W × D × H) | 700 × 500 × 1,000 mm (27.6 × 19.7 × 39.4 in) |
| Machine size (W × D × H) | 964 × 792 × 1,478 mm (37.9 × 31.1 × 58.2 in) |
| Maximum external package | 1,150 × 1,060 × 1,685 mm (45.28 × 41.73 × 66.34 in) |
| Weight | Net: 150 kg (approximately 330.7 lb) |
| Frame material | Aerospace-grade aluminum alloy |
| Print head system | TwinFlow™ — dual extrusion with single-nozzle Y-junction manifold |
| Print modes | Single extrusion; dual extrusion; dual extrusion high flow |
| Nozzle diameter | 0.6 mm default; 0.4 mm available |
| Nozzle type | High thermal conductivity CuCrZr base nozzle with solid wear-resistant SiC tip |
| Maximum nozzle temperature | 420°C |
| Filament diameter | 1.75 mm |
| Layer height | 0.3 mm with a 0.6 mm nozzle |
| Printing precision | IT11 grade (test filament: Raise3D Premium PLA) |
| Maximum printing speed | 600 mm/s |
| Maximum toolhead speed | 1,500 mm/s |
| Maximum toolhead acceleration | 30,000 mm/s² |
| Maximum TwinFlow™ hotend flow | 80 mm³/s |
| Build plate | Flexible double-sided PEI build plate |
| Leveling | Mesh-leveling with flatness detection |
| Heated bed material | Silicone heater pad |
| Maximum build plate temperature | 120°C |
| Active chamber heating | Available — maximum chamber heating temperature 60°C |
| Electric top cover | Available |
| Auxiliary heat dissipation module | Available |
| Filter | HEPA filter with activated charcoal |
| Operating environment | 15–30°C; 10–90% RH, non-condensing |
| Storage environment | −25°C to +55°C; 10–90% RH, non-condensing |
| Power supply | 220V model: 200–240 VAC, 50/60 Hz, 230V @ 16A; 110V model: 100–120 VAC, 50/60 Hz, 110V @ 20A |
| Slicing software | ideaMaker |
| Supported file types | STL, OBJ, 3MF, OLTP, STEP, STP, IGES, IGS |
| Supported operating systems | Windows, macOS, Linux |
| Machine code type | GCODE |
| Live camera resolution | 1920 × 1080 |
| Nozzle camera resolution | 2592 × 1944 |
| Detection & recovery | Filament run-out sensor; power-loss recovery; flow rate detection; spaghetti detection; nozzle clumping detection |
| Connectivity | Wi-Fi, LAN/Ethernet, USB port, live camera |
| Ports | USB 3.0 × 1; Ethernet × 1 |
| Wi-Fi protocol | WPA / WPA2 / WPA3-PSK |
| User interface | 7-inch touch screen, 1024 × 600 |
| Controllers | Motion: STM ARM Cortex-M7 550MHz DP-FPU; Logic: RK ARM Cortex-A55 Quad 2 GHz |
| Memory / flash | 2 GB RAM; 32 GB onboard flash |
| Operating system | Debian |
| Electric door lock | Available |
| Neural processing unit | Up to 1 TOPS (INT8); mixed-precision INT8 / INT16 / FP16 / BFP16 computing |
[1] Maximum toolhead speed was obtained at a toolhead acceleration of 10,000 mm/s². [2] Maximum flow depends on material, temperature, nozzle and print settings. Confirm material availability and the selected regional configuration before ordering.
Delivery & Workspace Preparation
Ships from — Stafford, TX 77477 (Greater Houston Area). Delivery is available to most U.S. locations.
Warranty — Confirm T700-specific coverage, conditions and exclusions before ordering.
Taxes at Checkout — Applicable taxes are calculated and charged at checkout based on your shipping address. Tax-exempt purchases: submit your tax-exemption documentation at checkout; sales-tax exemption applies after review and approval (1–2 business days).
Plan the Complete Delivery Route — Check the complete delivery route against the maximum package dimensions of 1,150 × 1,060 × 1,685 mm. The machine measures 964 × 792 × 1,478 mm; check doorways, corners and lifts, and agree unloading arrangements before delivery.
Prepare the Installation Space — Provide an indoor operating environment of 15–30°C and 10–90% relative humidity, non-condensing. Keep room for front operation, top access, filament handling and maintenance, and obtain the required T700 service clearances from Raise3D.
Confirm Handling & Power — Arrange handling equipment suitable for a printer with a net weight of 150 kg. Check the selected electrical version and grounded supply: 110V @ 20A for the 110V version, or 230V @ 16A for the 220V version.
T700 Frequently Asked Questions
Will my part fit the T700? — Compare your part’s dimensions, orientation and support requirements with the T700’s 700 × 500 × 1,000 mm build volume. Not sure? Contact Raise3D with your 3D model (STEP/STL), part dimensions and material requirements.
Should I choose the T450 or T700? — Compare your part orientation, support requirements and available installation space. Choose the T700 when you need more width, depth or height for your part.
| Compare | T450 | T700 |
| Build volume (W × D × H) | 450 × 350 × 400 mm | 700 × 500 × 1,000 mm |
| Machine size (W × D × H) | 710 × 635 × 785 mm | 964 × 792 × 1,478 mm |
| Nozzle diameter | 0.4 mm default; 0.6 mm available | 0.6 mm default; 0.4 mm available |
| Choose when | Your part and supports fit the T450 build volume. | You need more width, depth or height for your part. |
What electrical supply does the T700 require? — The 110V version is rated for 100–120 VAC, 50/60 Hz, with 110V @ 20A; the 220V version is rated for 200–240 VAC, 50/60 Hz, with 230V @ 16A. Confirm the required grounded circuit with your installation provider before delivery.
How will the T700 be delivered and installed? — Allow for a maximum external package of 1,150 × 1,060 × 1,685 mm and a printer net weight of 150 kg. Check doorways, turns and lifts along the complete route, and arrange suitable unloading and handling equipment. Confirm service clearances, electrical supply and installation arrangements with Raise3D before delivery.
Which materials and nozzle options are supported? — The standard nozzle diameter is 0.6 mm, with a 0.4 mm nozzle available. The nozzle uses a CuCrZr base and a wear-resistant SiC tip, with a maximum temperature of 420°C. Available materials include Hyper Speed PLA, PLA Pro, ABS, PETG CF and PET CF; Industrial PPA CF, PET Support and PPS CF; and Premium PLA, ABS, ASA, PETG and TPU-95A. Coming-soon materials are Industrial PPA GF, PET CF, PET GF, PETG ESD and PPA Support, and Premium PVA+.
How can I check the T700 warranty terms? — Contact Raise3D for the warranty coverage, service terms and exclusions applicable to the T700 before ordering. Confirm the coverage period and service arrangements with your purchase terms.
What software and file-transfer options does the T700 support? — Use ideaMaker on Windows, macOS or Linux to prepare models and export GCODE. Supported model inputs include STL, OBJ, 3MF and STEP. The T700 supports Wi-Fi, Ethernet and USB 3.0.
