{"product_id":"pro-pctg-cf10-carbon-fiber-1-75mm","title":"Pro PCTG+CF10, 10% Carbon Fiber PCTG Filament","description":"\u003ch3\u003ePro PCTG+CF10, 10% Carbon Fiber PCTG\u003c\/h3\u003e\n\u003cp\u003ePro PCTG-CF10 has been \u003cstrong\u003ecustom-engineered\u003c\/strong\u003e for ease of 3D printing.\u003c\/p\u003e\n\u003cp\u003eCompared to unfilled Pro PCTG, Pro PCTG-CF10 is:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e22% stronger\u003c\/strong\u003e (tensile strength at break)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e108% stiffer\u003c\/strong\u003e (tensile modulus)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.2% lighter\u003c\/strong\u003e (density)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou \u003cstrong\u003emust\u003c\/strong\u003e use a hardened nozzle with Pro PCTG-CF10, as it is abrasive.\u003c\/p\u003e\n\u003cp\u003ePro PCTG-CF10 has been tested in the Bambu AMS and AMS 2. It has not been tested in the AMS Lite.\u003c\/p\u003e\n\u003cp\u003eWhile all spools are sealed with a pack of desiccant, the carbon fiber content increases surface area and, therefore, the potential moisture absorption rate.\u003c\/p\u003e\n\u003cp\u003eFor the most reliable printing, we recommend drying for 6-8 hours at 65-70 °C and storing unused filament in a sealed container.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint Settings\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt 3D-Fuel, we're working to develop Pro PCTG profiles for as many popular 3D printers as possible, but unfortunately, we're unable to cover every single 3D printer brand, model, and upgrade permutation.\u003c\/p\u003e\n\u003cp\u003eWe have our \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/22046343945495\" target=\"_blank\"\u003edeveloped profiles available here for download\u003c\/a\u003e, but if you have a 3D printer we don't have a profile for yet, you can easily create one using the steps below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStart with a PETG profile\u003c\/li\u003e\n\u003cli\u003eIncrease hotend temp to 250-280C\u003c\/li\u003e\n\u003cli\u003eSet textured PEI bed temp to 80C\u003c\/li\u003e\n\u003cli\u003eDecrease cooling fan speeds as low as possible\u003c\/li\u003e\n\u003cli\u003eNo enclosure needed but, if you have one, close the lid and doors\u003c\/li\u003e\n\u003cli\u003eIf your enclosure is heated, 45C is a good temperature.\u003c\/li\u003e\n\u003cli\u003eTune your pressure advance settings\u003c\/li\u003e\n\u003cli\u003eEnable a wipe move after retraction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDrying\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDry filament is happy filament!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrying Temp: 65C\u003c\/li\u003e\n\u003cli\u003eDrying Time: 6-8 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease store Pro PCTG in an airtight container with desiccant, when possible. Even though Pro PCTG absorbs moisture more slowly than PETG, it will still absorb moisture over time.\u003c\/p\u003e\n\u003cp\u003eWet filament can cause a poor surface finish with your printed part and may even contribute to clogging nozzles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady-To-Go Print Profiles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/22046343945495-Pro-PCTG-Print-Profiles\"\u003ePro PCTG Material Profile\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBambu AMS Spool Size Compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll 3D-Fuel 1kg filament spools are AMS-compatible, unless otherwise specifically noted. \u003ca href=\"https:\/\/support.3dfuel.com\/hc\/en-us\/articles\/360059449374-What-are-the-sizes-and-weights-of-your-spools\" target=\"_blank\"\u003eLearn more about 3D-Fuel spool dimensions\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional 3D-Fuel Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFilament Quality:\u003c\/strong\u003e\u003cbr\u003eAll 3D-Fuel 3D printer filament is manufactured in United States production facilities. We have exceptional control over the manufacturing process and can ensure consistent quality for every spool.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.3dfuel.com\/pages\/filament-quality\"\u003eLearn more about 3D-Fuel filament quality\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiameter Tolerance:\u003c\/strong\u003e\u003cbr\u003eOur filament diameter tolerance is +\/- 0.02 mm.\u003c\/p\u003e\n\u003cp\u003eHigh filament diameter variability can cause significant problems in your 3D printer. We use a multi-axis laser measurement system to control our filament diameter and ovality in real time during production.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePacking Information:\u003c\/strong\u003e\u003cbr\u003eA full 1kg (2.2lbs) of Pro PCTG 3D printing filament arrives on an easy-to-use, plastic AMS-compatible spool and is vacuum sealed with a desiccant packet to keep out any moisture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTest Printing:\u003c\/strong\u003e\u003cbr\u003eThe 3D-Fuel test lab features multiple brands of 3D printers, including Bambu Lab, Creality3D, Anycubic, Elegoo, Prusa, QIDI, FlashForge, and more. We 3D print what we manufacture to ensure that our filament provides the best quality possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical \u0026amp; Safety Datasheets\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c!-- The original content for this section was empty or contained only an SVG icon. If there was text, it should be added here. --\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Choose 3D-Fuel Pro PCTG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you're looking for a \u003cstrong\u003efilament as easy to print as PETG but with superior strength, durability, and clarity\u003c\/strong\u003e, Pro PCTG is the perfect choice. Whether you're printing \u003cstrong\u003efunctional parts, engineering-grade prototypes, or multi-color projects\u003c\/strong\u003e, this filament ensures \u003cstrong\u003econsistent and reliable performance\u003c\/strong\u003e every time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3D-Fuel Pro PCTG – The PETG Upgrade\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePro PCTG takes everything you love about PETG and makes it better—\u003cstrong\u003eup to 20x tougher, more chemically resistant, and clearer\u003c\/strong\u003e. It offers \u003cstrong\u003eexceptional impact strength\u003c\/strong\u003e, making it perfect for functional parts, prototypes, and demanding applications. With \u003cstrong\u003elow moisture absorption\u003c\/strong\u003e, it prints reliably without warping or brittleness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Pro PCTG Difference\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChemical Resistance\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eChemical Type\u003c\/th\u003e\n\u003cth\u003eExamples\u003c\/th\u003e\n\u003cth\u003ePCTG Advantage\u003c\/th\u003e\n\u003cth\u003ePETG Limitation\u003c\/th\u003e\n\u003cth\u003eComparison (CRR)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAlcohols\u003c\/td\u003e\n\u003ctd\u003eIsopropyl alcohol (IPA), ethanol, methanol\u003c\/td\u003e\n\u003ctd\u003eResists prolonged exposure without degrading or cracking.\u003c\/td\u003e\n\u003ctd\u003eDegrades or stress cracks with high alcohol concentrations over time.\u003c\/td\u003e\n\u003ctd\u003e1.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHydrocarbons\u003c\/td\u003e\n\u003ctd\u003eHexane, heptane, gasoline, mineral spirits\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to hydrocarbon-based solvents.\u003c\/td\u003e\n\u003ctd\u003eSoftens or weakens when exposed to hydrocarbons.\u003c\/td\u003e\n\u003ctd\u003e2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAcids\u003c\/td\u003e\n\u003ctd\u003eAcetic acid, citric acid, phosphoric acid\u003c\/td\u003e\n\u003ctd\u003eMaintains structural integrity in mild to moderately concentrated acids.\u003c\/td\u003e\n\u003ctd\u003eDegrades faster in acidic environments at higher concentrations.\u003c\/td\u003e\n\u003ctd\u003e1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBases (Alkalis)\u003c\/td\u003e\n\u003ctd\u003eSodium hydroxide, potassium hydroxide, ammonium hydroxide\u003c\/td\u003e\n\u003ctd\u003eBetter resistance to strong alkalis.\u003c\/td\u003e\n\u003ctd\u003eMay crack or degrade when exposed to strong bases.\u003c\/td\u003e\n\u003ctd\u003e1.33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning Agents\u003c\/td\u003e\n\u003ctd\u003eBleach (sodium hypochlorite), industrial degreasers, detergent solutions\u003c\/td\u003e\n\u003ctd\u003eWithstands harsh cleaning agents without discoloration or damage.\u003c\/td\u003e\n\u003ctd\u003eDiscolors, cracks, or loses properties with harsh cleaning agents over time.\u003c\/td\u003e\n\u003ctd\u003e1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOils and Lubricants\u003c\/td\u003e\n\u003ctd\u003eEngine oils, hydraulic fluids, cutting oils\u003c\/td\u003e\n\u003ctd\u003eResists degradation from prolonged exposure to oils.\u003c\/td\u003e\n\u003ctd\u003eAbsorbs oils over time, potentially leading to swelling or weakening.\u003c\/td\u003e\n\u003ctd\u003e1.6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKetone\u003c\/td\u003e\n\u003ctd\u003eAcetone, methyl ethyl ketone (MEK)\u003c\/td\u003e\n\u003ctd\u003ePerforms slightly better in low-concentration ketones.\u003c\/td\u003e\n\u003ctd\u003eSoftens or dissolves more readily in ketone-rich environments.\u003c\/td\u003e\n\u003ctd\u003e1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eReviews\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustomers say\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePro PCTG+CF10 is a 3D printing filament known for its superior toughness, chemical resistance, and clarity compared to PETG. It offers enhanced durability, lower moisture absorption, and a broad color selection, making it ideal for high-impact applications and multi-color printing. The material is praised for its excellent strength, flexibility, and print quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy 3D-Fuel?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eTrusted by Thousands\u003c\/li\u003e\n\u003cli\u003eUSA Based Support\u003c\/li\u003e\n\u003cli\u003eHighest Quality Materials\u003c\/li\u003e\n\u003cli\u003e100% Satisfaction Guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDownloads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_TDS_9-2-25.pdf?v=1756827548\" target=\"_blank\"\u003eFilament TDS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_Pro_PCTG_SDS_rev_2-16-25.pdf?v=1743202948\" target=\"_blank\"\u003eFilament SDS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/3D-Fuel_RoHS_Letter_of_Conformity_-_9_2_25_10_48_AM.pdf?v=1756828167\" target=\"_blank\"\u003eFilament RoHS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/15hLIEGU3xl0QXJnoWtb-UiYsOSPAiOtg83_sv3qbKpc\/edit?usp=sharing\" target=\"_blank\"\u003eFilament Hex Code\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eWhat makes Pro PCTG better than PETG?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePro PCTG is \u003cstrong\u003eup to 30x tougher than PETG\u003c\/strong\u003e, offering \u003cstrong\u003esuperior impact resistance, higher clarity, and better chemical resistance\u003c\/strong\u003e while maintaining the same ease of printing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eDoes Pro PCTG require an enclosed printer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo! \u003cstrong\u003ePro PCTG prints just like PETG\u003c\/strong\u003e and does not require an enclosure, making it easy to use on open-frame printers.\u003c\/p\u003e\n\u003cp\u003eThat said, you can maximize your part toughness and reduce warping from drafts by using an enclosure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eIs Pro PCTG moisture-sensitive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt has a \u003cstrong\u003elower moisture absorption rate than PETG\u003c\/strong\u003e, but for best results, store it in a \u003cstrong\u003edry, sealed container\u003c\/strong\u003e when not in use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eCan Pro PCTG be used for outdoor applications?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! With \u003cstrong\u003ehigh impact resistance and strong chemical durability\u003c\/strong\u003e, Pro PCTG is great for \u003cstrong\u003efunctional parts, outdoor components, and industrial use\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"3D Fuel","offers":[{"title":"Pro PCTG+CF10 \/ 1kg 1.75mm Spool \/ Midnight Black","offer_id":47400019067101,"sku":"E45C10","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0085\/0506\/5530\/files\/OliverRabbit-ProPCTGCarbonFiber10-0.4mmnozzle_2400x1349_fa7ee83a-f43f-4e80-9cc7-76920cad9d4b.jpg?v=1771039498","url":"https:\/\/hartsmartproducts.com\/products\/pro-pctg-cf10-carbon-fiber-1-75mm","provider":"HartSmart Products","version":"1.0","type":"link"}