Now Offering Reflow rPETG Eco-Friendly Filament! Click here!

Modix BIG-40 v3

Uniquely Small Footprint, Tall Industrial 3D Printer!

  • Print volume of 400 x 400 x 800 mm
  • Printer dimensions: 870 x 720 x 1,520 mm
  • Shipping weight: ~100kg
  • Delivery method: Self-assembly kit
  • Print head: single E3D Aero & E3D Volcano 1.75mm
  • Duet3D Wifi 32 bit controller
  • 100 probing point for automatic bed leveling
  • Compatible with both 110V and 230V
  • Additional Add-ons available, such as a Secondary Print Heat or Active Air Filter
  • Price includes 12 months of warranty and lifetime support. Warranty does not include degradable (PEI sheet and nozzles) and consumables.

General Information

Printing Technology – FFF (Fused Filament Fabrication)

Number of print heads – 1 or 2

Delivery – Self-assembly kit. Assembly guide includes easy to follow videos and online 3D models that can be rotated and zoomed.

Dimensions

Print Volume:

400 x 400 x 800 mm (XYZ)

Machine Size:

Machine dimensions: 870 x 720 x 1,520 mm

* not including filament spools on the left side

Weight:

100 kg

* Including packaging, enclosure, and 2nd print head

Chassis

  • Solid 40X40 T-slot aluminum profiles
  • Powder-coated laser cut aluminum brackets and joints
  • Enclosure made of 3mm black Aluminum Composite Panels (ACP).

Interface

  • 7-inch Duet3d touchscreen – integrated with the controller
  • WiFi web access for remote control from either mobile or PC
    allowing users to upload print files directly from their workstation.
  • SD card slot and USB.

Motion System

  • Hiwin MGW12H linear guide rails
  • Four Z ball screws for Z axis 16mm diameter, 4mm pitch
  • 9 mm width Gates GT2 timing belt, reinforced with fiberglass
  • Axis Motors: Motech Nema 17  60mm length MT-1705HS200A
    | Holding Torque: 114oz.in (8.2kg.cm) | Current / Phase: 2.00A |
  • Position accuracy: X-10 Micron, Y-10 Micron,  Z-0.5 Micron.
  • Print speed – Normal quality 60 mm/sec, Draft 100 mm/sec
    Calculated for 0.4 nozzles. Larger nozzles normally print slower but provide parts much faster due to a reduced number of layers (thicker layer = lower resolution = faster results).

Power

  • Support both 110V and 230V
  • For electronics: – Meanwell 24V 280W Power Supply
    • Protections: Short / Over-load / Over-voltage / Over-heating.
    • No-load power consumption<0.5W
    • LED indicator for power on
    • Aviation grade switches and connectors
  • Heat Bed AC powered heater 1370 Watt
  • PID bed heater controller by Autonics

Print Bed

  • 6.35mm thick, Alcoa Mic6 milled cast aluminum plate, made in the USA.
  • AC powered bed heater 1370 Watt. Requires additional independent 15A AC source.
  • Dual heating zones. Inner 200X200mm size for small objects and lower power consumption.
  • Max temperature – 120C
  • Print surface – PEI film with 3M high temp adhesive sheet.

Auto Bed Leveling

  • BL touch probe as standard
  • Probing of bed shape is kept in controller memory and activated before each print.
  • Probing mesh

Software

  • Open source Duet RepRap firmware. The leading firmware for 3D printing allowing numerous configurations and easy customization using the macro system.
  • One can choose from any available slicer and 3D printer controller including Slic3r, Cura, and Simplified3d (recommended).
    Specific printer configurations are supplied in the customer zone.

Extruder

  • E3D Aero extruder for both primary and secondary extruders.
  • Configuration: Main – direct drive, secondary – direct drive.
  • Extruder drive gear ratio 3:1 for power and accuracy.
  • Nema17 40mm for high power extrusion.
  • Adjustable tension idler.

Hot End

  • E3D Volcano high flow heat block – standard.
    Optional E3D V6 for very small items with high details or SuperVolcano for a very fast high flow and bulky objects (shown at the photo on the right).
  • The 1.75 mm filament diameter is the default, but the end-customer can change it to 3mm filament.
  • 0.4, 0.6 & 0.8 mm brass Volcano nozzles.
  • Smaller nozzle diameters are available for the standard V6
  • Heater cartridge is 24V 40W, max temperature is 285C by default. Can be converted to a higher temperature of up to 500C
    by the end-customer by changing the thermistor, if needed.
  • Part cooling fan – 5015 blower fan

Filament

The printing head(s) supports almost any existing filament including :

PLA, ABS, composites: Carbon fiber, Wood, Copper, Brass, Magnetic…, PHA, PVA, Hips, Nylon, TPE & TPU (flexible) Co-Polyester, PETG…

Open Filament  – Any filament from any vendor can be used.

Filament Run-Out Sensor – The filament run-out detection sensor will pause the print job when the filament has been used up. 

CONTACT US FOR A QUOTE



Category: 3D Printer, Modix



Related Items