Official Creality BL-Touch Upgrade Kits
Designed to work with all 3D Printers
BL-Touch is an auto-leveling sensor for 3D Printers that can precisely measure the tilt of the bed surface. It could work with any kind of bed material, such as glasses, wood, metals, and so on.
BLTouch provides high precision by using progressively designed solenoid and hall sensors. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating, and Z-probe(Zmin) Testing.
The main functions and controls of BLTouch are the same as the usual auto bed leveling sensor, which consists of an RC servo and microswitch. Thus, BLTouch can be applied on almost every board.
Self-test: The push pin operates two times in a test when the power is on.
Alarm： The LED light blinks if a problem was found on a self-test or during operation
Wiring defect indicator： Blue and Red LED for indicating wiring defects.
Easy to Use: This auto bed leveling sensor makes it easier to level the hotbed, which can precisely measure the tilt of the Bed surface. Bed leveling is not a problem anymore.
Intelligence self-check and alarm: The function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
HartSmart Products also offers 8-bit and 32-bit boards which can be found Here.
**This kit does NOT include a bracket for installation. You will either need to print your own or grab one of the specified 8-bit or 32-bit boards.**