1 5
Bambu Lab  |  SKU: PF002-A-US

Bambu Lab A1 3D Printer

$299.00 $399.00

Description

Bambu Lab A1 3D Printer

IMPORTANT NOTE: This item ships directly from Bambu Lab. 

  • Processing time on A1 Printers is 72 hours. Standard shipping fee is $30.00 to anywhere in the USA. 

Active Flow Rate Compensation

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration

The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Quick Swap Nozzle

All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.

Active Motor Noise Cancelling

The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger with CoreXY Speed And Quality

Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Product Features

  • Full-auto Calibration
  • Multi-Color Printing (Combo Version)
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume
  • The upgraded heatbed cable features Kevlar reinforcement, thicker insulation, softer copper, optimized wire winding interval, Nylon sleeving and an extended strain relief.

Specifications

Body Build Volume(W*D*H) 256*256*256 mm³
Toolhead Hot End All-Metal
Nozzle Stainless Steel
Max Hot End Temperature 300 °C
Nozzle Diameter 0.4 mm (Included)
0.2 mm, 0.6 mm, 0.8 mm
Heatbed Build Plate Bambu Textured PEI Plate (Included)
Bambu Smooth PEI Plate
Bambu Dual-Texture PEI Plate
Bambu High Temperature Plate (Smooth PEI)
Bambu Cool Plate
Max Build Plate Temperature 100°C
Speed Max Speed of Tool Head 500mm/s
Max Acceleration of Tool Head 10000mm/s²
Supported Filament PLA, PETG, TPU, PVA Ideal
ABS, ASA, PC, PA, PET,
Carbon/Glass Fiber Reinforced Polymer		 Not Recommended
Sensors Chamber Monitoring Camera Low Frame Rate Camera (Up to 1080P)
Timelapse Supported
Filament Run Out Sensor Yes
Filament Odometry Yes
Power Loss Recover Yes
Filament Tangle Sensor Yes
Physical Dimensions A1 : 385*410*430 mm³ , Package size : 596*536*325 mm³ , Net weight 8.3 kg , Gross weight 13 kg
A1 Combo : Package size 560*540*430 mm³ , Gross weight (AMS lite included) 13.5 kg
Bambu Lab

Bambu Lab A1 3D Printer

From $299.00 $399.00

Bambu Lab A1 3D Printer

IMPORTANT NOTE: This item ships directly from Bambu Lab. 

Active Flow Rate Compensation

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration

The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Quick Swap Nozzle

All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.

Active Motor Noise Cancelling

The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger with CoreXY Speed And Quality

Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Product Features

  • Full-auto Calibration
  • Multi-Color Printing (Combo Version)
  • Active Flow Rate Compensation
  • 1-Clip Quick Swap Nozzle
  • Active Motor Noise Cancelling
  • 256*256*256 mm³ Build Volume
  • The upgraded heatbed cable features Kevlar reinforcement, thicker insulation, softer copper, optimized wire winding interval, Nylon sleeving and an extended strain relief.

Specifications

Body Build Volume(W*D*H) 256*256*256 mm³
Toolhead Hot End All-Metal
Nozzle Stainless Steel
Max Hot End Temperature 300 °C
Nozzle Diameter 0.4 mm (Included)
0.2 mm, 0.6 mm, 0.8 mm
Heatbed Build Plate Bambu Textured PEI Plate (Included)
Bambu Smooth PEI Plate
Bambu Dual-Texture PEI Plate
Bambu High Temperature Plate (Smooth PEI)
Bambu Cool Plate
Max Build Plate Temperature 100°C
Speed Max Speed of Tool Head 500mm/s
Max Acceleration of Tool Head 10000mm/s²
Supported Filament PLA, PETG, TPU, PVA Ideal
ABS, ASA, PC, PA, PET,
Carbon/Glass Fiber Reinforced Polymer		 Not Recommended
Sensors Chamber Monitoring Camera Low Frame Rate Camera (Up to 1080P)
Timelapse Supported
Filament Run Out Sensor Yes
Filament Odometry Yes
Power Loss Recover Yes
Filament Tangle Sensor Yes
Physical Dimensions A1 : 385*410*430 mm³ , Package size : 596*536*325 mm³ , Net weight 8.3 kg , Gross weight 13 kg
A1 Combo : Package size 560*540*430 mm³ , Gross weight (AMS lite included) 13.5 kg

Option

  • A1 Standalone Printer
  • A1 Combo with AMS Lite
View product
Back to top