3D Printers

Modix Big-40 3D Printer

Name: Modix Big-40 3D Printer
Brand: Modix
SKU: Modix-Big40-v3
Price: 4500.00 USD
Availability: InStock

$4,500.00

**NOTE** Contact Products@HSP3D.com for details regarding availability

Uniquely Small Footprint, Tall Industrial 3D Printer!

Print volume of 400 x 400 x 800 mm
Printer dimensions: 870 x 720 x 1,520 mm
Shipping weight: ~100kg
Delivery method: Self-assembly kit
Print head: single E3D Aero & E3D Volcano 1.75mm
Duet3D Wifi 32 bit controller
100 probing point for automatic bed leveling
Compatible with both 110V and 230V
Additional Add-ons available, such as a Secondary Print Heat or Active Air Filter
Price includes 12 months of warranty and lifetime support. Warranty does not include degradable (PEI sheet and nozzles) and consumables.

Printing Technology – FFF (Fused Filament Fabrication)

Number of print heads – 1 or 2

Delivery – Self-assembly kit. Assembly guide includes easy to follow videos and online 3D models that can be rotated and zoomed.

Print Volume:

400 x 400 x 800 mm (XYZ)

Machine Size:

Machine dimensions: 870 x 720 x 1,520 mm

* not including filament spools on the left side

Weight:

100 kg

* Including packaging, enclosure, and 2nd print head

7-inch Duet3d touchscreen – integrated with the controller
WiFi web access for remote control from either mobile or PC
allowing users to upload print files directly from their workstation.
SD card slot and USB.

Hiwin MGW12H linear guide rails
Four Z ball screws for Z axis 16mm diameter, 4mm pitch
9 mm width Gates GT2 timing belt, reinforced with fiberglass
Axis Motors: Motech Nema 17 60mm length MT-1705HS200A
| Holding Torque: 114oz.in (8.2kg.cm) | Current / Phase: 2.00A |
Position accuracy: X-10 Micron, Y-10 Micron, Z-0.5 Micron.
Print speed – Normal quality 60 mm/sec, Draft 100 mm/sec
Calculated for 0.4 nozzles. Larger nozzles normally print slower but provide parts much faster due to a reduced number of layers (thicker layer = lower resolution = faster results).

6.35mm thick, Alcoa Mic6 milled cast aluminum plate, made in the USA.
AC powered bed heater 1370 Watt. Requires additional independent 15A AC source.
Dual heating zones. Inner 200X200mm size for small objects and lower power consumption.
Max temperature – 120C
Print surface – PEI film with 3M high temp adhesive sheet.

BL touch probe as standard
Probing of bed shape is kept in controller memory and activated before each print.
Probing mesh

Open source Duet RepRap firmware. The leading firmware for 3D printing allowing numerous configurations and easy customization using the macro system.
One can choose from any available slicer and 3D printer controller including Slic3r, Cura, and Simplified3d (recommended).
Specific printer configurations are supplied in the customer zone.

E3D Volcano high flow heat block – standard.
Optional E3D V6 for very small items with high details or SuperVolcano for a very fast high flow and bulky objects (shown at the photo on the right).
The 1.75 mm filament diameter is the default, but the end-customer can change it to 3mm filament.
0.4, 0.6 & 0.8 mm brass Volcano nozzles.
Smaller nozzle diameters are available for the standard V6
Heater cartridge is 24V 40W, max temperature is 285C by default. Can be converted to a higher temperature of up to 500C
by the end-customer by changing the thermistor, if needed.
Part cooling fan – 5015 blower fan

The printing head(s) supports almost any existing filament including :

PLA, ABS, composites: Carbon fiber, Wood, Copper, Brass, Magnetic…, PHA, PVA, Hips, Nylon, TPE & TPU (flexible) Co-Polyester, PETG…

Open Filament – Any filament from any vendor can be used.

Filament Run-Out Sensor – The filament run-out detection sensor will pause the print job when the filament has been used up.